Skip to content
Welcome ! Please let us know if you need an help. For other T-harness options please visit T-harness.com. Thank you
Welcome ! Please let us know if you need an help. For other T-harness options please visit T-harness.com. Thank you
Wāvtech USA

Wāvtech USA

Focused on OEM Integration
Wāvtech’s sole mission is providing a complete line of audio interfaces for use with any amplifier brand. Our product line-up is focused on maximum application coverage in as few models as possible, each with superior features, audio performance and quality. All Wāvtech line output converters can produce up to 10 volts of output per channel which is more than enough for most connected aftermarket gear. 
 
Works with factory amps
Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way you retain all your vehicle's factory audio options and warnings when you're installing an aftermarket amplifier. Wavtech's gain control and clip light help you keep the signal level under control and distortion-free.
 
Innovative Design
Each Wāvtech model has been meticulously designed from the ground up using the latest advances in circuit design, components and materials to achieve extraordinary form and function. With several patents pending and more unique models on the way, we are committed to the aftermarket’s bright upgrade future.  +

Wāvtech LinkRC

Wavtech
Original price $27.95 USD - Original price $27.95 USD
Original price
$27.95 USD
$27.95 USD - $27.95 USD
Current price $27.95 USD
Low stock

Remote Level Control The linkRC is the add-on remote level control (RLC) for the linkDQ. It is also a replacement for some legacy models (see belo...

View full details

Wāvtech ART 12v DC turn on trigger

Wavtech
Original price $18.50 USD - Original price $18.50 USD
Original price
$18.50 USD
$18.50 USD - $18.50 USD
Current price $18.50 USD
In stock

The Wavtech ART is the best and most reliable 12v audio trigger on the market. With a 1.5 amp load capability you can use it to turn on a couple of...

View full details

Wāvtech LinkLD

Wavtech
Original price $8.00 USD - Original price $8.00 USD
Original price
$8.00 USD
$8.00 USD - $8.00 USD
Current price $8.00 USD
In stock

In-Line Parallel Load All Wāvtech models have built-in loading, but in some cases a little more resistance is required. The linkLD is an in-line pa...

View full details

Industry leaders or thieves?

Stolen designs

For years people like CAF and 5STAR said you HAD to pull new speaker wire, then we showed up and now they say loops are the way. Don't trust people who copy others and try to take credit.

The year was 2018

Before the solutions were even needed we had them. It wasn't until 2022 that PAC Audio and Metra would have to backstep and steal our design to stay in the game.

The SCAM that is PAC Audio

The amp-pro was PACs first try to steal our ideas. It failed so bad they had to steal our ANC bypasses to make the amp-pro (2019) work better. (pic taken 2017)

12v Knowledge block

What Is "High Level" or "Low level" ?

What Is "High Level" or "Low level" ?

High level: AKA Speaker level is an amp that can handle an input voltage of 8-40v. This high output is common in factory amplified vehicles or where the
max voltage of a head unit is more than 10v. This is normally identified by a pigtail connection point or via the RCA on the amplifier (must check user manual to verify). Some amps have a switch for this. NOT all amps have this feature.

Low Level: is 0-8v of signal voltage. This is most commonly found in aftermarket head units or other aftermarket units that use can-bus. Most passive LOC units output 0-5v, so they are considered a low level and are normally RCA to RCA. Modern day ACTIVE LOC units can output 0-10v of signal.

In conclusion an LOC works as an in-line filter that lets you control the signal, its intensity and in some cases the playable frequency range.

If your amp takes a high level and it is within the vehicles factory output range then you don't need an loc unit and can wire in and out of your amp directly. In some Fords the signal can be flattened at the OBD2, further simplifying the installation.

Wavtech Units

Automotive Amp Racks

We created the Automotive Amp Rack

We created the Automotive Amp Rack

to give customers a secure place to mount their equipment without damaging their vehicles and having the ability to build and test everything outside of the vehicle. Choosing durable materials like ABS, HDPE, Acrylic and always using factory bolts was our mission.

This product has now turned into an upsell by shops and copy-cats like 5star and car audio fabrications on YouTube to be sold as some type of beauty product. Shops are using cheap materials like expanded PVC board and charging customers a premium price for doing something they should have been doing all along. Your choices are get robbed, or screw holes and water leaks.

They do not represent what our products are and we don't appreciate the theft of our products and ideas being used to steal from customers.